Products
made DP3.5-43.5-1.0-2.0-W1.2
New energy
For new energy charging infrastructure operators, Tesla public and home charging pile maintenance teams, and electric vehicle accessories OEMs, reliable zero fault power supply and signal transmission are the core to reduce downtime and avoid users' complaints about charging session failures. Our specially made DP3.5-43.5-1.0-2.0-W1.2 plastic spring pin fully meets the specification requirements of 2P-5.0PH-10 and is specially used for 12V DC transmission in Tesla charging piles, directly solving the common pain points such as high contact resistance, loose connection and short service life caused by common pogo pin substitutes.contact us
Product category
The precision spring pin is made of high-purity 3U brass as the core conductive material, which can provide the maximum static contact impedance of no more than 50 milliohms even under the continuous operation of 2.0 amperes, effectively eliminating the abnormal voltage drop that usually triggers Tesla's built-in charging fault code and interrupts the intermediate charging session. The 120g ± 20g elasticity carefully calibrated at the standard working height produces a stable and uniform matching pressure when the vehicle charging plug is docked with the pile each time. Even in high traffic public charging places with dozens of plug and pull cycles every day, it can prevent intermittent signal disconnection.contact us
Different from the low-cost spring pin whose performance deteriorates rapidly due to the use of thin deformable copper coating, our 3U brass conductive layer maintains its original electrical performance even after tens of thousands of uses, and will not oxidize or rust to the peak contact resistance over time. The DP3.5-43.5-1.0-2.0 reinforced W1.2 engineering plastic enclosure provides full insulation and IP65 rated dust-proof protection against extreme temperature fluctuations from -40 ° C to 85 ° C, making it suitable for outdoor charging pile installation in all climatic regions, from cold northern regions to high temperature southern coastal regions. https://www.pogopinrqb.com/contact-us/
Expansion: The rated life of the industrial grade spring pin is 100000 full service cycles, which is 3 to 4 times higher than the performance of general competitive products, and reduces the replacement cost of the operator's long-term charging pile components by more than 70%. The 2P-5.0PH-10 compatible component is a 100% replacement of the original Tesla charging post internal connector, and no additional modification is required during maintenance or mass production. Fully certified by the global electric vehicle component safety standards, it is an ideal upgrade option for charging station operators seeking to reduce unplanned downtime,
